Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery for the Chevrolet Trax

Model: Chevrolet Trax MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Key

See other generations:
Video tutorial

The most expensive solution is not always the right one. In fact, this could be the case for your smart key for the Chevrolet Trax. Often, an unexpected and unexplained malfunction is simply due to a completely exhausted battery, making the solution much simpler and cheaper.

First, locate the metal button on the side of the cover and press it to slide out the physical key. Next, open the cover and proceed to replace the button cell battery.

Finally, correctly reassemble the cover and insert the physical key back inside.


Updated on 21 June 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Chevrolet Trax?
How to Replace the Remote Battery of the Chevrolet Trax?
Chevrolet Trax (2013-2022 / MK 1) Replacing the remote battery of the Chevrolet Trax, as shown in this tutorial, is an extremely simple and quick operation. You will need a replacemen…
How to Replace the Key Battery in a Chevrolet Trax
How to Replace the Key Battery in a Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) To correctly replace the button battery located inside the smart key of your Chevrolet Trax, follow these simple steps. First, obtain a flat screwdri…
Where is the OBD2 port of the Chevrolet Trax located?
Where is the OBD2 port of the Chevrolet Trax located?
Chevrolet Trax (2013-2022 / MK 1) Thanks to the steps described in the following guide aimed at all of you who own a first-generation Chevrolet Trax, you will be able to find the OBD2…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos