Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on a Chevrolet Captiva

Model: Chevrolet Trax MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Side mirror

See other generations:
Video tutorial

Learn the information and procedure for removing and replacing the external wing mirror on a Chevrolet Trax. First, open the front door of the vehicle and begin removing the door panel by unscrewing all the fastening screws and disconnecting the electrical connector; then unscrew the fastening screws of the wing mirror from the inside, disconnecting the electrical cable to slide it out and remove it from the outside, as shown in the video.

At this point, install the new wing mirror by securing the rear screws and reassembling the door panel.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

Removal of the exterior rearview mirror of the Chevrolet Trax.
Removal of the exterior rearview mirror of the Chevrolet Trax.
Chevrolet Trax (2013-2022 / MK 1) The steps today will allow us to dismantle and replace the exterior rearview mirror of the Chevrolet Trax. First, let's open the front door of the ve…
Where is the fuse box located on the 2019 Chevrolet Trax?
Where is the fuse box located on the 2019 Chevrolet Trax?
Chevrolet Trax (2013-2022 / MK 1) If you do not know where the main fuse box is located on your 2019 Chevrolet Trax, do not worry because the instructions in this guide will help you …
How to program the key fob for the Chevrolet Trax
How to program the key fob for the Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) To program the second key for the Chevrolet Trax, we need to get inside the vehicle with both keys and insert the key we want to program into the ign…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos