Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wiper on the Chevrolet Trax

Model: Chevrolet Trax MK 1 - Years 2013-2022
Part: Windshield wipers

Discover in this video how to remove and replace the rear wiper blade on the Chevrolet Trax in simple steps. First, remove the plastic cover of the rear wiper by prying it off at the sides; then lift the blade and detach the wiper from the arm using a sharp object like a flat screwdriver to unclip it, as shown in the video. At this point, replace it with the correct new one, ensuring it is properly fitted onto the arm; simply apply the reverse procedure for reassembly!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wiper Blade on the Chevrolet Trax
How to Replace the Rear Wiper Blade on the Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) Today, we will go through the instructions to remove and replace the rear wiper blade on the Chevrolet Trax in simple steps. First, move to the rear …
How to Replace the Key Battery in a Chevrolet Trax
How to Replace the Key Battery in a Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) To correctly replace the button battery located inside the smart key of your Chevrolet Trax, follow these simple steps. First, obtain a flat screwdri…
How to Remove the Door Panel on a Chevrolet Trax
How to Remove the Door Panel on a Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) To remove the door panel on the Chevrolet Trax, you need to loosen the screws that secure it to the door. These screws are located in the handle rece…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos