Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Door Handle of the Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Handle

The instructions in this guide will allow you to disassemble and replace the external door handle of the front door of the Chevrolet Cruze. First, open the front door of the vehicle and start unscrewing the fixing screw located on the side of the handle, thus removing the lock cylinder. Next, remove the entire door handle as shown in the video. At this point, install the new external handle, securing it properly with the side screw; finally, reassemble the lock cylinder!

Posted on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Door Handle on a Chevrolet Cruze?
How to Replace the External Door Handle on a Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) To replace the external door handle on a Chevrolet Cruze, first remove the internal panel: loosen the screws located in the handle recess, near the w…
Engine and Internal Fuse Box Location on Chevrolet Cruze
Engine and Internal Fuse Box Location on Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) In this video, you will see the location of the internal and external fuse boxes on a second-generation Chevrolet Cruze, following the instructions b…
How to Replace the Front Headlight Bulb on a Chevrolet Cruze
How to Replace the Front Headlight Bulb on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) If you want to independently replace the front headlight bulb on your first-generation Chevrolet Cruze (2009-2015) but are unsure how to proceed, pay…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos