Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Third Brake Light on a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part:

See other generations:
Video tutorial

Open the boot and remove the two T15 Torx screws that secure the central third brake light from the holes located at the bottom of the bodywork. At this point, obtain a plastic trim tool or a small flathead screwdriver and, sitting in the back seats, remove the cover of the aforementioned central brake light by prying from underneath.

Disconnect the connectors and the entire housing will come away. Proceed in reverse for reassembly: connect the connectors to the new brake light you purchased, fit it into place, and then, working from underneath, screw in the two T15 Torx screws.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How do you program the key for the Chevrolet Cruze?
How do you program the key for the Chevrolet Cruze?
Chevrolet Cruze (2016-2023 / D2lc, D2lc-K) In order to program the key of the Chevrolet Cruze, you need to insert the blank key into the ignition switch, turning it to position two to turn on …
How to Replace the Interior Dome Light Bulbs on Chevrolet Cruze
How to Replace the Interior Dome Light Bulbs on Chevrolet Cruze
Chevrolet Cruze (2000-2010 / ) In this video, we will see instructions for removing and replacing the interior dome light bulbs on a first-generation Chevrolet Cruze by following t…
How to Remove the Rear Stop Light on Cruze
How to Remove the Rear Stop Light on Cruze
Chevrolet Cruze (2000-2010 / ) Remove the light on the Chevrolet Cruze to replace it or change blown bulbs? Here’s how to disassemble it. Open the boot lid, then remove the plastic…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos