Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program the key for the Chevrolet Cruze?

Model: Chevrolet Cruze D2lc, D2lc-K - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

In order to program the key of the Chevrolet Cruze, you need to insert the blank key into the ignition switch, turning it to position two to turn on the instrument panel: you will need to leave the key in position two for at least ten minutes. After this time, you will need to turn it the other way and return it to position one, then repeat the previous step: this process must be done a total of three times.

Once the third time is completed, you can verify that the key has been correctly programmed.


Posted on 20 March 2025 by ScegliAuto


Related tutorials

How to Program a New Remote for the Chevrolet Cruze?
How to Program a New Remote for the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) Programming a new remote for the Chevrolet Cruze, as shown in this tutorial, is an extremely simple and quick operation. You will need a working key;…
How to programme a new remote for the Chevrolet Cruze?
How to programme a new remote for the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) In this tutorial, you will see how to programme a new remote for the Chevrolet Cruze, a very simple and quick operation. To do this, you will obvious…
Disassemble the Key of a Chevrolet Cruze
Disassemble the Key of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos