Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to programme a new remote for the Chevrolet Cruze?

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Key

See other generations:
Video tutorial

In this tutorial, you will see how to programme a new remote for the Chevrolet Cruze, a very simple and quick operation. To do this, you will obviously need a working key; otherwise, you will need to contact an official Chevrolet dealership.

Start by entering the cabin, then insert the working key, turn on the ignition, and turn it off after 5 seconds. Next, insert the new key, turn the ignition on again, turn it off, and check the correct functioning of the lock and unlock buttons for the doors.


Updated on 14 September 2026 by ScegliAuto


Related tutorials

How to programme a new remote for the Chevrolet Cruze?
How to programme a new remote for the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) As we can see in this tutorial, programming a new remote for the Chevrolet Cruze is a very simple and quick operation. To do this, you will need a wo…
How to Program a New Remote for the Chevrolet Cruze?
How to Program a New Remote for the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) Programming a new remote for the Chevrolet Cruze, as shown in this tutorial, is an extremely simple and quick operation. You will need a working key;…
How to program the remote key for the Chevrolet Cruze
How to program the remote key for the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) In this guide, we will see the instructions that will allow us to program the remote control of the Chevrolet Cruze key. First, let's get inside the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos