Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program a New Remote for the Chevrolet Cruze?

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Key

Programming a new remote for the Chevrolet Cruze, as shown in this tutorial, is an extremely simple and quick operation. You will need a working key; otherwise, you must visit an official dealership. Start by inserting the working key, then turn on the ignition and switch it off after about 3 seconds. Next, insert the new key, turn on the ignition again, and switch it off once more after 3 seconds. At this point, if the procedure has been executed correctly, the new key will be programmed and ready for use.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to programme a new remote for the Chevrolet Cruze?
How to programme a new remote for the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) In this tutorial, you will see how to programme a new remote for the Chevrolet Cruze, a very simple and quick operation. To do this, you will obvious…
How to program the remote key for the Chevrolet Cruze
How to program the remote key for the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) In this guide, we will see the instructions that will allow us to program the remote control of the Chevrolet Cruze key. First, let's get inside the …
How to programme a new remote for the Chevrolet Cruze?
How to programme a new remote for the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) As we can see in this tutorial, programming a new remote for the Chevrolet Cruze is a very simple and quick operation. To do this, you will need a wo…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos