Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to programme a new remote for the Chevrolet Cruze?

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Key

As we can see in this tutorial, programming a new remote for the Chevrolet Cruze is a very simple and quick operation. To do this, you will need a working key; otherwise, you will need to visit an official dealership. Start by entering the cabin, then insert the working key, turn on the instrument cluster, and turn it off after about 5 seconds. Next, insert the new key, turn the cluster on again, and after another 5 seconds, start the engine. At this point, test the correct operation of all buttons.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to programme a new remote for the Chevrolet Cruze?
How to programme a new remote for the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) .. In this tutorial, you will see how to programme a new remote for the Chevrolet Cruze, a very simple and quick operation. To do this,.. …
Disassemble the Key of a Chevrolet Cruze
Disassemble the Key of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …
How to Replace the Remote Battery on Chevrolet Cruze
How to Replace the Remote Battery on Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) To replace the battery inside the remote of your first-generation Chevrolet Cruze, you will need a new CR2032 battery and a small flathead screwdrive…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos