Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Internal Heating Pipes

Model: Chevrolet Camaro MK 4 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Engine

See other generations:
Video tutorial

The ducts that carry water to the radiator for cabin heating are partly made of aluminium and partly of rubber: in case of a leak, you can choose to repair or replace them; in the latter case, the operation is quite simple. After draining the coolant, simply disconnect the hoses from the inlet and outlet pipes of the internal radiator (a special pliers may be useful to open the clips); then disconnect the same pipes from the thermostat and unscrew the mounting bolts of the support brackets, proceeding in reverse for the installation of the new ones.

Finally, refill the system with the appropriate fluid.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Replacement of Wiper Blades
Replacement of Wiper Blades
Chevrolet Camaro (2007-2016 / MK 5) Replacing wiper blades is extremely simple and can easily be done as a DIY task. Once you lift the wiper arm, rotate the blade 90°, unclip the fasten…
Engine Air Filter Replacement
Engine Air Filter Replacement
Chevrolet Camaro (2007-2016 / MK 5) The engine air filter housing (AIR BOX) is located at the front right of the engine bay (when facing forward), specifically on the driver's side, jus…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Chevrolet Camaro (1993-2002 / MK 4) To facilitate the oil drainage from the sump, lift the vehicle on a hydraulic lift or suitable car ramps. Then, unscrew the drain plug located on the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos