Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Air Filter Replacement

Model: Chevrolet Camaro MK 5 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Air filter

See other generations:
Video tutorial

The engine air filter housing (AIR BOX) is located at the front right of the engine bay (when facing forward), specifically on the driver's side, just behind the windscreen washer reservoir. Disconnect the metal clips securing the cover, lift it off, and remove the old filter; ensure there are no dirt residues inside the filter box (remove them using a vacuum cleaner rather than compressed air to prevent them from entering the intake duct) and fit the new filter; reposition the cover and secure the metal clips.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Guide to Replacing Engine Air Filter
Guide to Replacing Engine Air Filter
Chevrolet Camaro (1993-2002 / MK 4) A clogged air filter leads to reduced engine performance and excessive fuel consumption. Its function is to protect the engine by trapping impurities…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Chevrolet Camaro (1993-2002 / MK 4) To facilitate the oil drainage from the sump, lift the vehicle on a hydraulic lift or suitable car ramps. Then, unscrew the drain plug located on the…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Chevrolet Camaro (2007-2016 / MK 5) Position the vehicle on a lift to facilitate access to the oil sump. Proceed by unscrewing the drain plug located on the side of the sump to drain th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos