Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing Engine Air Filter

Model: Chevrolet Camaro MK 4 - Years 1993-2002
Part: Air filter

A clogged air filter leads to reduced engine performance and excessive fuel consumption. Its function is to protect the engine by trapping impurities from the airflow. It is located in front of the engine's air intake and ensures good quality of the air-fuel mixture. To replace it, first locate its position, open the air filter housing, remove the old filter, and compare it with the new one, cleaning the bottom of the housing where the filter sits with a damp cloth or a vacuum cleaner. Once done, insert the new filter into the housing and close the casing.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Air Filter Replacement
Engine Air Filter Replacement
Chevrolet Camaro (2007-2016 / MK 5) The engine air filter housing (AIR BOX) is located at the front right of the engine bay (when facing forward), specifically on the driver's side, jus…
Replacement of Internal Heating Pipes
Replacement of Internal Heating Pipes
Chevrolet Camaro (1993-2002 / MK 4) The ducts that carry water to the radiator for cabin heating are partly made of aluminium and partly of rubber: in case of a leak, you can choose to …
Instructions for Replacing the Water Pump
Instructions for Replacing the Water Pump
Chevrolet Camaro (1993-2002 / MK 4) Start by removing the intake duct; to access some bolts more easily, it is also recommended to remove the plastic cover of the throttle control and t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos