Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Cabin Air Filter

Model: Chevrolet Camaro MK 5 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Cabin air filter

See other generations:
Video tutorial

Replacing the cabin air filter (like the regular one) is very important, as we've seen in previous articles. The procedure is generally simple, although it can vary for different vehicles.

In this video, we'll see an alternative procedure; first, open the bonnet and remove the rubber seal located under the filter housing, which is at the top of the bonnet, beneath the wipers. Now you can proceed to remove the plastic cover, under which the filter is housed, held by some rivets: use a screwdriver to pull them out. The filter housing is secured by two side clips: unclip them and replace the filter.

Refit everything in reverse order.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Engine Air Filter Replacement
Engine Air Filter Replacement
Chevrolet Camaro (2007-2016 / MK 5) The engine air filter housing (AIR BOX) is located at the front right of the engine bay (when facing forward), specifically on the driver's side, jus…
Guide to Replacing Engine Air Filter
Guide to Replacing Engine Air Filter
Chevrolet Camaro (1993-2002 / MK 4) A clogged air filter leads to reduced engine performance and excessive fuel consumption. Its function is to protect the engine by trapping impurities…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Chevrolet Camaro (1993-2002 / MK 4) To facilitate the oil drainage from the sump, lift the vehicle on a hydraulic lift or suitable car ramps. Then, unscrew the drain plug located on the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos