Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Thermostat on a Chevrolet Silverado

Model: Chevrolet Silverado MK 3 - Years: 2014, 2015, 2016, 2017, 2018
Part: Thermostat

See other generations:
Video tutorial

Follow the steps to remove and replace the thermostat on your Chevrolet Silverado, as outlined below. First, open the hood of your vehicle and begin removing the upper engine cover.

Next, disconnect the coolant hoses connected to the thermostat, allowing the fluid to drain into a container, as shown in the video. At this point, remove the thermostat mounting bolts to take it out and replace it with the new one. Install the new thermostat, following the video until the end!


Updated on 21 May 2026 by ScegliAuto


Related tutorials

Where to Find the Fuses of the Chevrolet Silverado 2
Where to Find the Fuses of the Chevrolet Silverado 2
Chevrolet Silverado (2007-2014 / MK 2) Knowing the location of the fuses in your Chevrolet Silverado Mk2 is very important as it allows you to intervene safely and effectively in case of f…
Where to Find the Fuse Box of the 2006 Chevrolet Silverado
Where to Find the Fuse Box of the 2006 Chevrolet Silverado
Chevrolet Silverado (1998-2007 / MK 1) Finding the fuses in your first-generation Chevrolet Silverado (2006) is very simple. Just follow the steps in this guide to complete the task in sec…
How to Connect Your Smartphone to the Chevrolet Silverado
How to Connect Your Smartphone to the Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) To quickly and correctly connect your smartphone to the radio of the Chevrolet Silverado, simply follow the instructions in this new mini guide. Firs…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos