Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Wiper Blades

Model: Chevrolet Camaro MK 5 - Years 2007-2016
Part: Windshield wipers

Replacing wiper blades is extremely simple and can easily be done as a DIY task. Once you lift the wiper arm, rotate the blade 90°, unclip the fastening tab, and pull the blade downwards; before applying the new one, compare the length with the one just removed, and once you are sure of the match, proceed to secure it to the wiper arm, ensuring the fastening tab clicks into place. Generally, this maintenance is done before the winter season, but in reality, if they have been used throughout the winter, it would be correct to replace them even before summer to avoid being caught unprepared during any sudden storms.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing the Cabin Air Filter
Changing the Cabin Air Filter
Chevrolet Camaro (2007-2016 / MK 5) Replacing the cabin air filter (like the regular one) is very important, as we've seen in previous articles. The procedure is generally simple, altho…
Replacement of Internal Heating Pipes
Replacement of Internal Heating Pipes
Chevrolet Camaro (1993-2002 / MK 4) The ducts that carry water to the radiator for cabin heating are partly made of aluminium and partly of rubber: in case of a leak, you can choose to …
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Chevrolet Camaro (1993-2002 / MK 4) To facilitate the oil drainage from the sump, lift the vehicle on a hydraulic lift or suitable car ramps. Then, unscrew the drain plug located on the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos