Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Stop Light on Cruze

Model: Chevrolet Cruze - Years 2000-2010
Part: Tail light

Remove the light on the Chevrolet Cruze to replace it or change blown bulbs? Here’s how to disassemble it. Open the boot lid, then remove the plastic caps located at the side of the light. Undo the fastening screw of the rear light, detach the light from the bodywork and disconnect the power connectors. Replace the damaged bulbs with new ones (if blown). Reconnect the electrical connectors, secure the light, and screw in the fastening screws. Refit the screw cover caps. Turn on the lights and check the operation of the bulbs.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Third Brake Light on a Chevrolet Cruze
Replacing the Third Brake Light on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Open the boot and remove the two T15 Torx screws that secure the central third brake light from the holes located at the bottom of the bodywork. At t…
Replacing the Steering Angle Sensor on the Chevrolet Cruze
Replacing the Steering Angle Sensor on the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Today, we will go through the instructions to remove and replace the steering angle sensor on the Chevrolet Cruze. First, open the car's bonnet and d…
How to dismantle the steering wheel in the Chevrolet Cruze?
How to dismantle the steering wheel in the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) In this tutorial we can see how to disassemble the steering wheel in the Chevrolet Cruze, an extremely simple and quick operation. Before proceeding,…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos