Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Boot on a Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Body

If the boot of your Chevrolet Cruze won't open, there is likely a fault with the boot release fuse. To resolve this issue, access the fuse box located inside the passenger compartment, to the left and below the steering wheel. Remove the plastic cover protecting the fuse box, identify the blown fuse by consulting your car's manual, and extract it using a pair of small pliers. At this point, replace it with a new fuse and perform a quick test: now, your boot should open without any problems.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Boot Lid of the Chevrolet Cruze
How to Remove the Boot Lid of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) In this video tutorial, you will learn how to remove the boot lid of the first series Chevrolet Cruze by following these simple steps. First, open th…
How to disassemble the rear lights on the Chevrolet Cruze?
How to disassemble the rear lights on the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) In this tutorial, we can see how to disassemble the rear lights in the Chevrolet Cruze, an extremely simple and quick operation. First of all, make s…
How to replace the fuel flap on a Chevrolet Cruze?
How to replace the fuel flap on a Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) In this tutorial, you will see how to replace the fuel flap on a Chevrolet Cruze, a very simple and quick operation. First, open the flap using the d…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos