Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Rear Seats from Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Seat

Removing the backrests is very simple; just pull them upwards and they will come out of their clips. Now, for the seat base: use a large lever to pry underneath the seats, lifting them and detaching them from their mounts. Perform this operation under each of the three seat bases. Once successful, use pliers or your preferred tool to detach the lower attachments where the seats were clipped in. For reassembly, proceed in reverse: install the new hooks you purchased, clip the seats back in, and replace the backrests.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove Rear Seats from a Chevrolet Cruze
Remove Rear Seats from a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) To remove the rear seats, start with the seat base. The first two hooks to release are located at the centre of the left and right seat bases. Grip t…
Replacing the Fuel Pump on a Chevrolet Cruze
Replacing the Fuel Pump on a Chevrolet Cruze
Chevrolet Cruze (2000-2010 / ) Replacing the fuel pump on a Cruze? This operation is not too complicated. Let's look at removing the part from inside the tank. Disconnect the batte…
How to disassemble the rear seat of the Chevrolet Cruze
How to disassemble the rear seat of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Today we will see the instructions that will show us how to disassemble and remove the rear seat of the Chevrolet Cruze, in simple and quick steps. F…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos