Do it yourself
Frequently asked questions about cars and motorcycles

Removing Headrests on a Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Seat

Today, you will learn a simple but often overlooked task: removing the front headrests. Press the button related to the headrest and raise it to its maximum height. On the other plastic circle of the headrest, the one without a button, you will notice a small hole: insert a small flat screwdriver all the way in, and while still holding the previous button, pull out the headrest. Voila! Done! Inserting the new headrest is even simpler, as you just need to insert it into the seat holes and press it with a bit of force, and the clips will lock into place.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Chevrolet Cruze (2009-2015 / MK 1, J300) If you do not know where the fuses are located in your 2015 Chevrolet Cruze, do not worry as this guide provides a description of all the necessary s…
Chevrolet Cruze (2009-2015 / MK 1, J300) The logic of operation of the handbrake of a car is almost identical among all models produced, and this also applies to the Chevrolet Cruze. It is e…
Chevrolet Cruze (2009-2015 / MK 1, J300) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos