Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Pump on a Chevrolet Cruze

Model: Chevrolet Cruze - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Seat

See other generations:
Video tutorial

Replacing the fuel pump on a Cruze? This operation is not too complicated. Let's look at removing the part from inside the tank.

Disconnect the battery cables, then remove the rear seat cushions of the car. Unscrew the securing screws of the metal cap (if present) using a socket wrench, and remove it from its seat. Disconnect the power connectors and the fluid circulation tubes.

Remove the pump and pull it out of the tank. Install the new working pump with the accompanying screws and electrical connectors.

Test the fuel pump and finally refit the seats.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

How to Dismantle the Fuel Pump on a Chevrolet Cruze
How to Dismantle the Fuel Pump on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Today's instructions will show you how to dismantle and replace the fuel pump on a Chevrolet Cruze. To access the fuel pump, it will be necessary to …
Guide to replacing the fuel pump of the Chevrolet Cruze
Guide to replacing the fuel pump of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Below we will see the main steps that will allow us to disassemble and replace the fuel pump of the Chevrolet Cruze. First, we open the rear doors of…
Replacing the Fuel Pump on a Chevrolet Cruze
Replacing the Fuel Pump on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) The main steps today will show you how to remove and replace the fuel pump on a Chevrolet Cruze. First, lift the vehicle and begin removing the fuel …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos