Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the fuel pump of the Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Fuel pump

Below we will see the main steps that will allow us to disassemble and replace the fuel pump of the Chevrolet Cruze. First, we open the rear doors of the car and start removing the rear seat; to proceed with the disassembly of the fuel pump without removing the tank, it will be necessary to cut the sheet metal at the pump, as shown in the video. At this point, disconnect the pump hoses and the electrical connector, unscrewing the ring to remove it from the tank; replace it with the new one and reassemble everything!

Posted on 30 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the fuel pump of the Chevrolet Cruze
How to disassemble the fuel pump of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Today's instructions will show us how to disassemble and replace the fuel pump of the Chevrolet Cruze. To access the fuel pump, it will be necessary …
Replacing the Fuel Pump on a Chevrolet Cruze
Replacing the Fuel Pump on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) The main steps today will show you how to remove and replace the fuel pump on a Chevrolet Cruze. First, lift the vehicle and begin removing the fuel …
How to dismantle the fuel pump of the Chevrolet Cruze MK1
How to dismantle the fuel pump of the Chevrolet Cruze MK1
Chevrolet Cruze (2009-2015 / MK 1, J300) In today's video, we will see the instructions that will allow us to dismantle and replace the fuel pump of the first series Chevrolet Cruze. First, …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos