Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Fuel Pump on a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fuel pump

See other generations:
Video tutorial

Today's instructions will show you how to dismantle and replace the fuel pump on a Chevrolet Cruze. To access the fuel pump, it will be necessary to remove the fuel tank; to do this, lift the vehicle and unscrew all the screws of the tank brackets, then disconnect the fuel lines, as shown in the video.

Now disconnect the fuel pump hoses and the electrical connector, unscrewing the pump collar to remove it and replace it with the new one; reassemble and connect the new original pump, finally refitting the tank!


Updated on 3 October 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump on a Chevrolet Cruze
Replacing the Fuel Pump on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) The main steps today will show you how to remove and replace the fuel pump on a Chevrolet Cruze. First, lift the vehicle and begin removing the fuel …
How to dismantle the fuel pump of the Chevrolet Cruze MK1
How to dismantle the fuel pump of the Chevrolet Cruze MK1
Chevrolet Cruze (2009-2015 / J300, MK 1) In today's video, we will see the instructions that will allow us to dismantle and replace the fuel pump of the first series Chevrolet Cruze. First, …
Guide to replacing the fuel pump of the Chevrolet Cruze
Guide to replacing the fuel pump of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Below we will see the main steps that will allow us to disassemble and replace the fuel pump of the Chevrolet Cruze. First, we open the rear doors of…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos