Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the water pump of the Chevrolet Cruze?

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Pump

See other generations:
Video tutorial

To replace the water pump of the Chevrolet Cruze, you will need to open the hood in order to have access to the internal components of the engine compartment: on the left side of it, you will be able to locate the air filter box, which must be completely removed by disconnecting it from the intake pipe.

At this point, you will be able to locate the water pump underneath that will need to be removed from its seat by loosening the appropriate screws: now you can free the pump from its pulley and the appropriate fixing screws.

At this point, you can insert the new one to verify that everything is functioning properly.


Posted on 24 March 2025 by ScegliAuto


Related tutorials

How to Remove the Timing Belt on a Chevrolet Cruze
How to Remove the Timing Belt on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) In this video, we will see how to remove and replace the timing belt on a Chevrolet Cruze. Lift the car on a column lift (remove the front wheel and …
How to Dismantle the Fuel Pump on a Chevrolet Cruze
How to Dismantle the Fuel Pump on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Today's instructions will show you how to dismantle and replace the fuel pump on a Chevrolet Cruze. To access the fuel pump, it will be necessary to …
Replacing the Fuel Pump on a Chevrolet Cruze
Replacing the Fuel Pump on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) The main steps today will show you how to remove and replace the fuel pump on a Chevrolet Cruze. First, lift the vehicle and begin removing the fuel …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos