Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Timing Belt on a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Timing belt

See other generations:
Video tutorial

In this video, we will see how to remove and replace the timing belt on a Chevrolet Cruze. Lift the car on a column lift (remove the front wheel and the right wheel arch liner).

Use a spanner to loosen the tensioner pulley and slide the belt off. With a socket wrench, unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Install the new water pump, the tensioner, and the belt, tightening everything with the socket wrench.

Refit the rivets along with the wheel arch liner and reattach the wheel with the tyre.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on Chevrolet Cruze
Replacing the Timing Belt on Chevrolet Cruze
Chevrolet Cruze (2000-2010 / ) Replacing the timing belt on a Chevrolet Cruze? Here’s how to disassemble it. Remove the front wheel, using a screwdriver to take off the right wheel…
How to Replace the Alternator Belt on a Chevrolet Cruze?
How to Replace the Alternator Belt on a Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) In this tutorial, you will see how to replace the alternator belt on a Chevrolet Cruze, a very straightforward task. First, wait for the engine to co…
How to Remove the Crankshaft Pulley on the Chevrolet Cruze
How to Remove the Crankshaft Pulley on the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Today, we will see how to remove and replace the crankshaft pulley on the Chevrolet Cruze by following these simple steps. First, lift the vehicle an…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos