Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Cruze
  6. : Where is the windshield washer pump fuse located in the Chevrolet Cruze?

Chevrolet Cruze - Video tutorial

Model: Chevrolet Cruze J300, MK 1 - Years 2009-2015
Part: Pump
Operation: Where is the windshield washer pump fuse located in the Chevrolet Cruze?

In case the windshield washer pump of our Chevrolet Cruze suddenly stops working, the first thing we can do is check the status of the respective fuse whose position is indicated in this video. As shown, the fuse in question is located in the box inside the engine compartment, right in front of the battery. It is labeled with the code F56 and is the last one in the center column, looking at the box from the front. If it is faulty, make sure to use a replacement with the same specifications and always operate with the vehicle turned off, so as not to cause any damage.


Posted on 21 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos