Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Battery

See other generations:
Video tutorial

The replacement of the battery of a Chevrolet Cruze car does not require much time, in the selected video you can see the steps to follow. The battery is located on the left side inside the engine compartment so to access it you will first need to open the vehicle's hood.

Using a 10 mm wrench, loosen the fastening nut of the clamp with the negative pole and disconnect it, then proceed to disconnect the clamp with the positive pole as well; unscrew the bolt that secures the battery to the support and remove it. Insert the new battery, secure it to the support and this time connect first the clamp with the positive pole and then the one with the negative pole.


Posted on 23 March 2025 by ScegliAuto


Related tutorials

How to replace the battery of the Chevrolet Cruze remote control?
How to replace the battery of the Chevrolet Cruze remote control?
Chevrolet Cruze (2009-2015 / J300, MK 1) In this tutorial we can see how to replace the battery of the Chevrolet Cruze remote control, an extremely simple and quick operation. To do this, we…
How to replace the battery of the Chevrolet Cruze remote control?
How to replace the battery of the Chevrolet Cruze remote control?
Chevrolet Cruze (2016-2023 / D2lc, D2lc-K) In this tutorial we can see how to replace the battery of the Chevrolet Cruze remote control, an extremely simple and quick operation. To do this, we…
Disassemble the Key of a Chevrolet Cruze
Disassemble the Key of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos