Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Battery

See other generations:
Video tutorial

If you need to replace the battery in this model of vehicle, the procedure and necessary instructions for working safely are provided below. Once you have opened the bonnet, locate the battery on the left side.

Use a screwdriver to loosen the nuts securing the upper crossbar, then disconnect the negative terminal first, followed by the positive terminal, removing the fuse box. After that, extract the battery from its housing and position the new one, then reconnect the positive terminal and the fuse holder, followed by the negative terminal.

Finally, re-tighten the nuts securing the upper crossbar.


Updated on 20 July 2026 by ScegliAuto


Related tutorials

Disassemble the Key of a Chevrolet Cruze
Disassemble the Key of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …
How to replace the battery of the Chevrolet Cruze remote control?
How to replace the battery of the Chevrolet Cruze remote control?
Chevrolet Cruze (2009-2015 / J300, MK 1) In this tutorial we can see how to replace the battery of the Chevrolet Cruze remote control, an extremely simple and quick operation. To do this, we…
How to Replace the Remote Battery on Chevrolet Cruze
How to Replace the Remote Battery on Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) To replace the battery inside the remote of your first-generation Chevrolet Cruze, you will need a new CR2032 battery and a small flathead screwdrive…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos