Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Door Handle on a Chevrolet Cruze?

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Handle

See other generations:
Video tutorial

To replace the external door handle on a Chevrolet Cruze, first remove the internal panel: loosen the screws located in the handle recess, near the window switch and under the triangular cover by the external mirror. Disconnect the connectors to completely remove the panel; by loosening the two additional screws, you can shift the fabric cover.

Now, insert a screwdriver into the side of the door to move the tab and extract the end part of the external handle. After removing this part, you can also detach the actual handle.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

Replacing the External Door Handle of the Chevrolet Cruze
Replacing the External Door Handle of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) The instructions in this guide will allow you to disassemble and replace the external door handle of the front door of the Chevrolet Cruze. First, op…
How to Replace the External Wing Mirror on a Chevrolet Cruze?
How to Replace the External Wing Mirror on a Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) In this tutorial, see how to replace the external wing mirror on a Chevrolet Cruze, a very simple and quick operation. First, open the door you will …
Removing the Lock on a Chevrolet Cruze
Removing the Lock on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Learn how to remove the lock from the door of a Chevrolet Cruze. Remove the cover from the opening handle, then unscrew the screws with a screwdriver…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos