Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Lock on a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Door lock

See other generations:
Video tutorial

Learn how to remove the lock from the door of a Chevrolet Cruze. Remove the cover from the opening handle, then unscrew the screws with a screwdriver.

Unscrew the remaining screws on the door panel and detach the retaining clips. Disconnect the connectors for the window lift motor, the speaker located in the handle, and the tension cable for the door opening lever.

Grip the panel with your hands and lever it off the door. Remove the adhesive cover on the door metal and unscrew the lock retaining screws.

Take the lock piece out from inside the door.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

How to Replace the Lock Cylinder on the Chevrolet Cruze
How to Replace the Lock Cylinder on the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Today's instructions will show you how to remove and replace the lock cylinder on the Chevrolet Cruze in simple steps. First, open the front door of …
How to Replace the Door Lock Actuator on a Chevrolet Cruze
How to Replace the Door Lock Actuator on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) These simple steps will allow you to remove and replace the door lock actuator on the front door of a Chevrolet Cruze. First, open the front door of …
Replacing the External Door Handle of the Chevrolet Cruze
Replacing the External Door Handle of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) The instructions in this guide will allow you to disassemble and replace the external door handle of the front door of the Chevrolet Cruze. First, op…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos