Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lock Cylinder on the Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015

See other generations:
Video tutorial

Today's instructions will show you how to remove and replace the lock cylinder on the Chevrolet Cruze in simple steps. First, open the front door of the vehicle and start removing the side plastic cover of the door; then unscrew the screw found inside, removing the first rectangular piece of the cylinder and, if necessary, subsequently the entire handle, as illustrated in the video.

At this point, replace the lock cylinder if necessary, securing it properly; with the replacement of the cylinder, the use of a new key is required!


Updated on 31 August 2026 by ScegliAuto


Related tutorials

Replacing the External Door Handle of the Chevrolet Cruze
Replacing the External Door Handle of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) The instructions in this guide will allow you to disassemble and replace the external door handle of the front door of the Chevrolet Cruze. First, op…
How to program the remote key for the Chevrolet Cruze
How to program the remote key for the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) In this guide, we will see the instructions that will allow us to program the remote control of the Chevrolet Cruze key. First, let's get inside the …
How to Replace the Door Lock Actuator on a Chevrolet Cruze
How to Replace the Door Lock Actuator on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) These simple steps will allow you to remove and replace the door lock actuator on the front door of a Chevrolet Cruze. First, open the front door of …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos