Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of the Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Door trim panel

Below is the procedure to remove and replace the front door panel of the Chevrolet Cruze. First, open the front door and start by removing the plastic cover located behind the rearview mirror. Then, unscrew the fastening screws located on the opening handle and the sides of the door panel, as shown in the video. At this point, remove the window switch panel and disconnect the electrical connector found underneath. Finally, detach the door panel, applying the reverse procedure for reassembly!

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Door Lock Actuator on a Chevrolet Cruze
How to Replace the Door Lock Actuator on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) These simple steps will allow you to remove and replace the door lock actuator on the front door of a Chevrolet Cruze. First, open the front door of …
Removing the Door Panel on a Chevrolet Cruze
Removing the Door Panel on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Remove the door cover panel on a Chevrolet Cruze for maintenance or replacement. Take off the cover of the screws from inside the opening lever. Unsc…
How do you remove the door panel of the Chevrolet Cruze?
How do you remove the door panel of the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / MK 1, J300) It will be possible to remove the door panel of the Chevrolet Cruze by using a tool to pry off the inner trim of the handle housing. Then, you will n…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos