Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Door Panel on a Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Door trim panel

Remove the door cover panel on a Chevrolet Cruze for maintenance or replacement. Take off the cover of the screws from inside the opening lever. Unscrew the screws located in the handle plastics and inside the space of the opening lever. Disconnect the securing clips of the cover of the mirror (inner side). Remove the panel and detach it from the door (disconnect the power wiring and the opening cable). Carry out the desired maintenance inside the door or replace the panel with a new one if damaged. Refit all components associated with the door panel (connect the electrical terminals).

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Chevrolet Cruze (2009-2015 / MK 1, J300) Below is the procedure to remove and replace the front door panel of the Chevrolet Cruze. First, open the front door and start by removing the plasti…
Chevrolet Cruze (2009-2015 / MK 1, J300) Follow these steps to remove the door panel on a Chevrolet Cruze. Before starting, disconnect the battery terminals located in the boot. Begin by rem…
Chevrolet Cruze (2000-2010 / ) Let's see how to remove the speaker (located in the right door panel) of a Chevrolet Cruze after removing the door panel. Before starting disassembly…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos