Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Speaker on a Chevrolet Cruze

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Door trim panel

Follow these steps to remove the speaker on a Chevrolet Cruze after removing the door panel. Before starting, disconnect the battery terminals located in the boot. Begin by removing the plastic trim at the corner of the window using a lever. Use a screwdriver to unscrew the securing screws located in the plastic handle and in the door opening lever area. Once all screws are removed, use the lever to detach the window switch panel and all plastic clips securing the door. Pull the door panel away with your hands, disconnect any power connectors and the release cable. Unscrew the screws securing the speaker embedded in the door with a screwdriver; remove the speaker and disconnect the power connector.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Speaker from the Door Panel on a Chevrolet Cruze
How to Remove the Speaker from the Door Panel on a Chevrolet Cruze
Chevrolet Cruze (2000-2010 / ) Let's see how to remove the speaker (located in the right door panel) of a Chevrolet Cruze after removing the door panel. Before starting disassembly…
How to remove the Chevrolet Cruze car radio
How to remove the Chevrolet Cruze car radio
Chevrolet Cruze (2016-2023 / D2lc-K, D2lc) If the factory car radio inside your Chevrolet Cruze is broken and you want to replace it with a new one, then all you have to do is read the followi…
Disassemble the Key of a Chevrolet Cruze
Disassemble the Key of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos