Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Trax
    4. : Checks and maintenance

Chevrolet Trax - Checks and maintenance

Checks And Maintenance Chevrolet Trax (2013-2022 / mk 1)

Chevrolet Trax (2013-2022 / MK 1)
Where is the OBD2 port of the Chevrolet Trax located?
Thanks to the steps described in the following guide aimed at all of you who own a first-generation Chevrolet Trax, you will be able to find the OBD2 port …Read all…
Posted on 14 June 2025 by ScegliAuto
Chevrolet Trax (2013-2022 / MK 1)
How do you replace the tire pressure sensor of the Chevrolet Trax?
In order to replace the tire pressure sensor of the Chevrolet Trax, you need to deflate the tire enough so that it can be removed from the wheel rim: once the …Read all…
Posted on 27 May 2025 by ScegliAuto
Chevrolet Trax (2013-2022 / MK 1)
How to Perform a Service on a Chevrolet Trax
In this video tutorial, we can see how to perform a service on a Chevrolet Trax: the first step is to lift the bonnet and secure it with the appropriate prop. …Read all…
Posted on 15 August 2026 by ScegliAuto
Battery (1) Key (4) Timing belt (1) Onboard computer (1) Checks and maintenance (3) Air filter (1) Cabin air filter (3) Oil filter (1) A/C system (1) Headlight bulb (1) Tail light bulb (1) Engine oil (2) Clock (2) Door trim panel (1) Front bumper (1) Brake pads (1) Wheel (1) Fuse box (7) Side mirror (2) Warning light – error code (3) (4) Tire pressure warning light (3) Service warning light (9) Windshield wipers (2)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos