Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter on the Chevy Trax

Model: Chevrolet Trax MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Engine oil

See other generations:
Video tutorial

Are you ready to change the engine oil and filter on this model? The description below contains all the necessary instructions and steps to carry out the task. First, open the bonnet and lift the vehicle.

Open the oil filler cap and unscrew the oil drain plug located on the sump, after having obtained a container to collect the used oil. Next, unscrew the oil filter using the appropriate tool and replace it with the new one. Then, screw the drain plug back in and proceed to fill the system with new oil from above the engine bay.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Filter in a Chevrolet Trax
How to Change the Engine Oil and Filter in a Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) To replace the engine oil and filter on a first-generation Chevrolet Trax, bring the engine to its normal operating temperature, then switch it off a…
How to Replace the Air Filter on a Chevy Trax
How to Replace the Air Filter on a Chevy Trax
Chevrolet Trax (2013-2022 / MK 1) If you want to DIY the air filter replacement on this vehicle, follow the instructions below and you can also check the video. Once the bonnet is ope…
Oil and Oil Filter Change on Chevrolet Trax
Oil and Oil Filter Change on Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) Gather a Torx T45 bit, a 24 mm socket wrench, and an oil filter with code 55594651. Lift the car with a jack (if you don't have a ramp) and use the T…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos