Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Oil Filter Change on Chevrolet Trax

Model: Chevrolet Trax MK 1 - Years 2013-2022
Part: Oil filter

Gather a Torx T45 bit, a 24 mm socket wrench, and an oil filter with code 55594651. Lift the car with a jack (if you don't have a ramp) and use the T45 bit to unscrew the bolt that acts as the plug for the oil drain hole. Collect the used oil in a container using a funnel or a tube. Once it has completely drained, screw the bolt back in. Using the 24 mm socket, unscrew the oil filter cover and remove it. Clean the cover thoroughly and insert the new filter, then reassemble everything. Pour in the new oil from the compartment in the bonnet.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Filter in a Chevrolet Trax
How to Change the Engine Oil and Filter in a Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) To replace the engine oil and filter on a first-generation Chevrolet Trax, bring the engine to its normal operating temperature, then switch it off a…
How to reset the oil light on the Chevrolet Trax
How to reset the oil light on the Chevrolet Trax
Chevrolet Trax (2023-2026 / MK 2) Resetting the oil light, related to the engine oil change of the 2024 Chevrolet Trax, is a simple and quick operation that can be done independently.…
How to reset the oil service in the Chevrolet Trax?
How to reset the oil service in the Chevrolet Trax?
Chevrolet Trax (2013-2022 / MK 1) In this tutorial we can see how to reset the oil service in the Chevrolet Trax, an extremely simple and quick operation, to be carried out only after…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos