Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Oil Filter on a Chevrolet Captiva?

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Oil filter

See other generations:
Video tutorial

In this video, you can see where the oil filter is located on a Chevrolet Captiva and how to proceed if you need to replace it. As shown, the filter is positioned in the lower left area of the engine, just in front of the filler cap. To replace it, first go underneath the vehicle, then locate the drain bolt and unscrew it with a socket wrench.

Allow all the oil in the system to drain out, unscrew the filter housing, and insert the replacement.

At this point, you can reassemble everything and add new oil through the designated hole.


Updated on 7 November 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Filter on a Chevrolet Captiva?
How to Replace the Oil Filter on a Chevrolet Captiva?
Chevrolet Captiva (2006-2018 / MK 1) To replace the oil filter on a Chevrolet Captiva, open the bonnet to locate the components in the engine bay: the oil filter is located in its housin…
Where is the Oil Filter Located on the Chevrolet Captiva?
Where is the Oil Filter Located on the Chevrolet Captiva?
Chevrolet Captiva (2006-2018 / MK 1) In this video, see where the oil filter is located on the Chevrolet Captiva, to be replaced if you need to perform an oil change. As shown, it is loc…
Modifying Headlights on Chevrolet Captiva
Modifying Headlights on Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) Modify bi-xenon headlights on Captiva. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos