Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Oil Filter Located on the Chevrolet Captiva?

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Oil filter

See other generations:
Video tutorial

In this video, see where the oil filter is located on the Chevrolet Captiva, to be replaced if you need to perform an oil change. As shown, it is located under the bonnet, on the right side of the engine or to your left when looking at the vehicle from the front.

To remove it, simply unscrew the housing with a 36mm socket, but before doing this, you must drain all the oil contained in the circuit through the designated hole at the bottom of the engine. To facilitate the flow, you can open the upper filler cap.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Filter on a Chevrolet Captiva?
How to Replace the Oil Filter on a Chevrolet Captiva?
Chevrolet Captiva (2006-2018 / MK 1) To replace the oil filter on a Chevrolet Captiva, open the bonnet to locate the components in the engine bay: the oil filter is located in its housin…
Where is the Oil Filter Located on the Chevrolet Captiva and How to Replace It?
Where is the Oil Filter Located on the Chevrolet Captiva and How to Replace It?
Chevrolet Captiva (2006-2018 / MK 1) In this video, see where the oil filter is located on the Chevrolet Captiva and how to proceed if you need to replace it. This operation obviously in…
Where is the Oil Filter on a Chevrolet Captiva?
Where is the Oil Filter on a Chevrolet Captiva?
Chevrolet Captiva (2006-2018 / MK 1) In this video, you can see where the oil filter is located on a Chevrolet Captiva and how to proceed if you need to replace it. As shown, the filter …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos