Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Spark
    4. : Timing belt

Chevrolet Spark - Timing belt

Timing Belt Chevrolet Spark (2009-2016 / m 300, mk 1)

Chevrolet Spark (2009-2016 / M300, MK 1)
Guide to Replacing the Timing Belt on a Chevrolet Spark
This guide provides instructions to dismantle and replace the timing belt on a Chevrolet Spark. First, open the engine bonnet and start by removing the timing …Read all…
Posted on 17 August 2026 by ScegliAuto
Chevrolet Spark (2009-2016 / M300, MK 1)
How to Replace the Timing Chain on a Chevrolet Spark
To replace the timing chain on a Chevrolet Spark, loosen the screws securing the timing cover panel on the left side of the engine. Once this panel is removed, …Read all…
Posted on 10 July 2026 by ScegliAuto
Speaker (1) Antenna (1) Car stereo (3) Battery (2) Ignition coil (1) Spark plugs (6) Key (4) Timing belt (2) Dashboard (1) Bearing (1) Headlight (2) Tail light (1) Air filter (1) Cabin air filter (2) Fuel filter (3) Oil filter (1) Clutch (4) Window switch (1) Accessory kit (1) Light bulb (2) Headlight bulb (7) Tail light bulb (1) Interior dome light bulb (1) Handle (2) Engine oil (1) Door trim panel (5) Windshield (1) Brake pads (1) Shift knob (8) Fuel pump (3) Radiator (1) Fuse box (22) Side mirror (3) Warning light – error code (4) (4) Tire pressure warning light (1) Service warning light (13) EGR valve (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos