Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Spark
    4. : How do you replace the Chevrolet Spark timing chain?

Chevrolet Spark - Video tutorial

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part: Timing belt
Operation: How do you replace the Chevrolet Spark timing chain?

In order to replace the Chevrolet Spark timing chain, you need to loosen the screws that secure the distribution protection panel, located on the left side of the engine. Once this panel has been removed, it will be possible to loosen the bolts that fix the chain tensioner, so that its tension is reduced; at this point the chain can be removed from its chainrings, so that it can be replaced with a new spare part. After the replacement, it will be possible to re-assemble all the components previously removed.


Posted on 2 May 2024 by ScegliAuto



Chevrolet Spark timing belt replacement guide
Chevrolet Spark (2009-2016 / M300, MK 1) Let's find out together in this guide the instructions that will allow us to disassemble and replace the Chevrolet Spark timing belt. First of all, w
How to replace the spark plugs on a Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) Let's start by opening the bonnet of our Chevrolet Spark. Next we will have to disassemble and remove the air filter box, unscrewing the fixing screw
Replace the spark plug ignition coil on the Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) In this video tutorial we will see the steps on how to disassemble and replace the ignition coil connected to the spark plugs, which allows the curre

    Frequently Asked Questions

    • Spark 2009-2016 - How many km does the Chevrolet Spark timing belt need to be replaced? Read Answer
    • Spark 2009-2018 - How many miles does the Chevrolet Spark timing belt need to be replaced? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos