Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Spark
  6. : Dashboard

Chevrolet Spark - Dashboard

Chevrolet Spark (2009-2018 / )
Chevrolet Spark dashboard disassembly

In this video tutorial we will see how to remove the dashboard of a Chevrolet Spark. First, let's get inside the car and start removing all the side plastics …read all…
Posted on 26 December 2023 by ScegliAuto

Loudspeaker (1) Antenna (1) Car stereo (2) Battery (2) Coil (1) Spark plugs (4) Key (4) Timing belt (2) -board computer (1) Checks and maintenance (4) Dashboard (1) Bearing (1) Headlight (2) Tail light (1) Air filter (1) Cabin air filter (1) Petrol filter (1) Oil filter (1) Clutch (1) Accessory Kit (1) Light bulb (2) Headlight bulb (4) Rear light bulb (1) Interior lights ceiling light bulb (1) Engine oil (1) Door panel (5) Brake pads (1) Gear Shift Knob (7) Fuel pump (3) Instrument cluster (2) Radiator (1) Fuse box (7) Outside rearview mirror (3) EGR valve (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos