Do it yourself
Frequently asked questions about cars and motorcycles

Chevrolet Spark - Clutch

Clutch Chevrolet Spark (2009-2016 / m 300, mk 1)

Chevrolet Spark (2009-2016 / M300, MK 1)
How to Remove the Gearbox and Clutch from the Chevrolet Spark

In this brief guide, you will find the main instructions for removing the gearbox and clutch from the Chevrolet Spark. First, open the bonnet and begin by …Read all…
Posted on 5 June 2026 by ScegliAuto
Chevrolet Spark (2009-2016 / M300, MK 1)
How to permanently solve the clutch pedal failure issues of the Chevrolet Spark

In this video, we are shown what are the symptoms of a clutch pedal failure on a Chevrolet Spark and how to definitively solve them: one cause is the imprecise …Read all…
Posted on 30 December 2024 by ScegliAuto
Chevrolet Spark (2009-2016 / M300, MK 1)
How to replace the clutch cable of the Chevrolet Spark

In this video, we can see how to change the clutch cable of the Chevrolet Spark: this cable connects the clutch lever, operated by the driver's foot, to the …Read all…
Posted on 9 July 2024 by ScegliAuto
Chevrolet Spark (2009-2016 / M300, MK 1)
Guide to Replace the Clutch on the Chevrolet Spark (2014)

This guide provides the main instructions needed to remove and replace the clutch on the 2014 Chevrolet Spark, as well as the Matiz. First, open the engine …Read all…
Posted on 7 June 2026 by ScegliAuto

Speaker (1) Antenna (1) Car stereo (3) Battery (2) Ignition coil (1) Spark plugs (6) Key (4) Timing belt (2) Dashboard (1) Bearing (1) Headlight (2) Tail light (1) Air filter (1) Cabin air filter (2) Fuel filter (3) Oil filter (1) Clutch (4) Window switch (1) Accessory kit (1) Light bulb (2) Headlight bulb (7) Tail light bulb (1) Interior dome light bulb (1) Handle (2) Engine oil (1) Door trim panel (5) Windshield (1) Brake pads (1) Shift knob (8) Fuel pump (3) Radiator (1) Fuse box (22) Side mirror (3) Warning light – error code (4) (4) Tire pressure warning light (1) Service warning light (13) EGR valve (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos