Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the clutch cable of the Chevrolet Spark

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part: Clutch

In this video, we can see how to change the clutch cable of the Chevrolet Spark: this cable connects the clutch lever, operated by the driver's foot, to the clutch mechanism itself. So when the clutch lever is pressed, the cable transmits the movement to the clutch mechanism, disengaging it, allowing for smooth gear changes without damaging the transmission components. The cable is removed with a 3/8" key, and at the top we will find a plate with two 12mm nuts and on the opposite side it is connected to the clutch pedal, which can be removed using a flathead screwdriver. From here, we will pull the cable towards us. To install the new one, all we have to do is insert it into the hole, hook it to the pedal, and then push it inside until it is reconnected to the clutch.

Posted on 9 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Clutch Cable on the Chevrolet Spark
Replacing the Clutch Cable on the Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) Follow the steps below to remove and replace the clutch cable on the Chevrolet Spark. First, open the bonnet of the vehicle and begin by removing the…
How to Remove the Gearbox and Clutch from the Chevrolet Spark
How to Remove the Gearbox and Clutch from the Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) In this brief guide, you will find the main instructions for removing the gearbox and clutch from the Chevrolet Spark. First, open the bonnet and beg…
Guide to Replace the Clutch on the Chevrolet Spark (2014)
Guide to Replace the Clutch on the Chevrolet Spark (2014)
Chevrolet Spark (2009-2016 / M300, MK 1) This guide provides the main instructions needed to remove and replace the clutch on the 2014 Chevrolet Spark, as well as the Matiz. First, open the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos