Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Clutch Cable on the Chevrolet Spark

Model: Chevrolet Spark MK 1, M300 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

See other generations:
Video tutorial

Follow the steps below to remove and replace the clutch cable on the Chevrolet Spark. First, open the bonnet of the vehicle and begin by removing the battery, disconnecting both terminals.

Next, remove the bracket to access the clutch cable by unscrewing the adjustment screws and disconnecting the cable from the support bracket located at the bottom, as shown in the video. At this point, remove the cable along with the sheath, then replace it with the new one. Properly adjust the clutch cable by following the video tutorial to the end!


Updated on 14 August 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs of a Chevrolet Spark
How to Replace the Spark Plugs of a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) Begin by opening the bonnet of your Chevrolet Spark. Next, remove the air filter box by unscrewing the fixing screws and disconnecting the various ho…
How to Replace the Timing Chain on a Chevrolet Spark
How to Replace the Timing Chain on a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) To replace the timing chain on a Chevrolet Spark, loosen the screws securing the timing cover panel on the left side of the engine. Once this panel i…
Guide to Replacing the Timing Belt on a Chevrolet Spark
Guide to Replacing the Timing Belt on a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) This guide provides instructions to dismantle and replace the timing belt on a Chevrolet Spark. First, open the engine bonnet and start by removing t…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos