|
Do it yourself
| |||
| ||||
How to Replace the Automatic Shift Lever on the Chevrolet Suburban GMT 900
Model: Chevrolet Suburban
Gmt900
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
This guide shows how to replace the automatic shift lever on the Chevrolet Suburban GMT 900. The first step is to remove the panel on the left side of the dashboard and unscrew the screws at the bottom of the dashboard panel with a star screwdriver. Using a 10 mm wrench, unscrew the bolt securing the brake release lever. Remove the lower dashboard panel. Remove the steering wheel adjustment handle and take off the lower and upper steering wheel panels; the lower one may be held in place with screws. Disconnect the orange cable connector and the cable clips. Using a Torx T30 screwdriver, unscrew the fastening screw of the lever and pull out the part. Install the new component and reassemble everything in place. Check the proper functioning of the replacement part.
Updated on 10 July 2026 by ScegliAuto
Related tutorials
Chevrolet Suburban
(2007-2014 /
Gmt900)
This guide shows how to reset the date and time on the radio of the Chevrolet Suburban GMT 900 after disconnecting the battery. First, turn on the ra…
Chevrolet Suburban
(2007-2014 /
Gmt900)
To replace the battery in a Chevrolet Suburban, open the hood to access the components inside the engine compartment. The battery is located in the u…
Chevrolet Suburban
(2007-2014 /
Gmt900)
In today's video, you will see how to replace the key battery in the Chevrolet Suburban. This tutorial also applies to other Chevrolet models of the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Replace the Front Headlamp Bulb in a Kia Stonic?
Regardless of the type of bulb to be used, for example, the video shows how to install an H7 in a headlamp that involves similar work steps to the Kia Stonic, it is important to ensure that the instrument panel and lights are turned off. To replace the front headlamp bulb on the vehicle in question, open the bonnet, remove the plastic rear cap of the headlamp unit, unclip the metal fastener, and extract the bulb holder. Finally, simply remove the bulb to be replaced from the holder, insert the new one, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.032
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |