Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Clock on the Chevrolet Suburban GMT 900

Model: Chevrolet Suburban Gmt900 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Clock

See other generations:
Video tutorial

This guide shows how to reset the date and time on the radio of the Chevrolet Suburban GMT 900 after disconnecting the battery. First, turn on the radio and go to the display tab. Press and hold the lower left corner for about ten seconds until the keypad for entering the radio PIN appears.

Enter the PIN, and on the second page of the screen's diagnostic menu, select the time setting option. At this point, you need to enter the date and time in GMT format, and the year must be set to 2000 to reset the time.

After completing the procedure, you will have the current date and time.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Replace the Automatic Shift Lever on the Chevrolet Suburban GMT 900
How to Replace the Automatic Shift Lever on the Chevrolet Suburban GMT 900
Chevrolet Suburban (2007-2014 / Gmt900) This guide shows how to replace the automatic shift lever on the Chevrolet Suburban GMT 900. The first step is to remove the panel on the left side o…
How to Replace the Battery in a Chevrolet Suburban?
How to Replace the Battery in a Chevrolet Suburban?
Chevrolet Suburban (2007-2014 / Gmt900) To replace the battery in a Chevrolet Suburban, open the hood to access the components inside the engine compartment. The battery is located in the u…
How to Replace the Key Fob Battery of the Chevrolet Suburban
How to Replace the Key Fob Battery of the Chevrolet Suburban
Chevrolet Suburban (2007-2014 / Gmt900) In today's video, you will see how to replace the key battery in the Chevrolet Suburban. This tutorial also applies to other Chevrolet models of the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos