Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Chevrolet Suburban

Model: Chevrolet Suburban Gmt900 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Battery

See other generations:
Video tutorial

To replace the battery on this vehicle model yourself and if you don't know how to do it, the following description provides the information and steps to follow, and you can also check out the video. After opening the hood, locate the battery on the right side.

To remove it, you need to unscrew the support screws of the plate on top. Then, disconnect the negative terminal first and then the positive terminal. This way, you have freed the battery and can take it out of the compartment and proceed to replace it with the new one. Finally, reconnect the positive terminal first and then the negative terminal, and reattach the support screws of the upper plate.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in a Chevrolet Suburban
How to Replace the Key Battery in a Chevrolet Suburban
Chevrolet Suburban (2021-2026 / Gmt1yc) To change the battery inside your Chevrolet Suburban key fob, follow the procedure outlined in this guide. First, purchase a new button battery (mode…
How to Replace the Remote Battery in a Chevrolet Suburban?
How to Replace the Remote Battery in a Chevrolet Suburban?
Chevrolet Suburban (2021-2026 / Gmt1yc) Replacing the remote battery in a Chevrolet Suburban is a very simple and inexpensive task. Here’s how to proceed in this tutorial. You won’t need an…
How to Replace the Battery in a Chevrolet Suburban?
How to Replace the Battery in a Chevrolet Suburban?
Chevrolet Suburban (2007-2014 / Gmt900) To replace the battery in a Chevrolet Suburban, open the hood to access the components inside the engine compartment. The battery is located in the u…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos