Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Chevrolet Spark?

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part:

To reset the tire pressure warning light on the Chevrolet Spark, you need to inflate the tires until they reach the recommended pressure values: these values are written on the sticker attached to the driver's side door pillar. Once the tires have been inflated, you need to turn on the ignition to check that the warning light has completely disappeared: if it is still present, you will need to also start the engine and drive for a few kilometers to help the pressure sensors work properly.

Posted on 27 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Chevrolet Spark?
How do you reset the tire pressure light on the Chevrolet Spark?
Chevrolet Spark (2009-2016 / M300, MK 1) In order to restore the tire pressure warning light that appears on the instrument panel of the Chevrolet Spark, you will need to turn on the instrum…
How to Reset the Tyre Pressure Light on a Chevrolet Spark
How to Reset the Tyre Pressure Light on a Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) To reset the tyre pressure light on a Chevrolet Spark, turn the ignition on by rotating the key and pressing the MENU button located on the right sid…
How to reset the tire pressure sensor on the 2013 Chevrolet Spark
How to reset the tire pressure sensor on the 2013 Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) In the following guide addressed to those of you who own a Chevrolet Spark (year 2013), we will explain the steps you need to take in order to manual…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos