Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Tires on a Chevrolet Beat

Model: Chevrolet Beat MK 1 - Years 2010-2021
Part: Tires

In this video, you will learn how to change the tires on a Chevrolet Beat. First, while the wheel is still on the ground, loosen the bolts that hold it in place. Next, lift the vehicle with a jack. Remove the wheel and load it onto the machine to take off the used tire from the rim. Install the new tire and apply the balance weight for alignment. Reattach the wheel to its axle and tighten the bolts until you feel resistance. Lower the vehicle to the ground and finish tightening the bolts until they are secure. At this point, check the pressure.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on a Chevrolet Beat?
How to Replace the Cabin Filter on a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) To replace the cabin filter on a Chevrolet Beat, open the glove compartment on the passenger side to fully detach it. After removal, you can access t…
How to Replace the Cabin Filter on a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) As shown in this tutorial, replacing the cabin filter on a Chevrolet Beat is an extremely simple and quick task. Start by sitting in the passenger se…
How to Replace the Shift Knob on a Chevrolet Beat?
How to Replace the Shift Knob on a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) To replace the shift knob on a Chevrolet Beat, disconnect the clips that secure the shift boot at the base of the center console so it can be lifted.…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos