Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light Bulbs on a Chevrolet Beat?

Model: Chevrolet Beat MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part:

Video tutorial

The third brake light on the Chevrolet Beat consists of four bulbs. If one of these burns out, the other three will continue to work, but it is still a good idea to replace it. To do this, use a screwdriver to remove the two screws that hold the plastic cover of the light in place.

Once this is removed, press the two levers on the side of the bulb holder to detach it from the housing and gain access to the bulbs. Identify the burnt-out bulb and replace it with a new one, avoiding direct contact with the surface using your fingers.

Reassemble everything back in place.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Chevrolet Beat?
How to Replace the Cabin Filter on a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) To replace the cabin filter on a Chevrolet Beat, open the glove compartment on the passenger side to fully detach it. After removal, you can access t…
How to Replace the Cabin Air Filter in a Chevrolet Beat?
How to Replace the Cabin Air Filter in a Chevrolet Beat?
Chevrolet Beat (2010-2021 / MK 1) As you can see in this tutorial, replacing the cabin air filter in the Chevrolet Beat is a very simple and quick task. First, since it is located beh…
How to Replace the Shock Absorbers on a Chevrolet Beat
How to Replace the Shock Absorbers on a Chevrolet Beat
Chevrolet Beat (2010-2021 / MK 1) To replace the shock absorbers on a Chevrolet Beat, lift the car with a jack or a lift so that the wheel corresponding to the shock absorber being re…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos